PAGLok System RTI and Digital Batteries

PAG NMH100 Time Battery

A high performance Ni-MH battery, and the most powerful in the PAGlok range.

It has a nominal capacity of 7.5Ah, providing approximately 100 watt-hours - ideal for powering high definition cameras and on-board lighting simultaneously.

The PAG NMH100 Time Battery weighs little more than a 5Ah
Ni-Cd and yet provides almost 50% more power.

Model	9375
Voltage	13.2V
Capacity	7.5Ah
Size	208 x 126 x 44mm
Weight	2.2kg

PAG NMH60 Time Battery

The PAG NMH60 is the original Time Battery. It is a compact and lightweight Ni-MH battery, ideal for the smaller range of digital camcorders.

The NMH60 provides more power for weight than a Ni-Cd and costs less than the Li-Ion option.

Model	9374
Voltage	14.4V
Size	130 x 86 x 42mm
Weight	0.88kg

PAG 5Ah RTI Battery

A 13.2V 5Ah Digital Ni-Cd battery compatible with PAG System RTI.

The battery provides an accurate run-time prediction that counts down in hours, minutes and seconds, and is displayed in the camera viewfinder.

Away from the camera the battery provides a capacity reading with the PAG Digital Battery Reader.

Model	9354
Voltage	13.2V
Capacity	5Ah
Size	208 x 126 x 44mm
Weight	1.95kg

PAG C50 Digital Cobalt

A 50 watt-hour battery with Cobalt Power cells.

It features all the benefits of a Ni-Cd (it performs well at extreme temperatures and can be fast-charged in less than an hour) combined with increased capacity in a compact and lightweight package.

Its size makes it ideal for smaller digital camcorders and yet it will power a light up to 100W.

The battery provides an accurate run-time prediction that counts down in hours, minutes and seconds,

displayed in the camera viewfinder, with System RTI.

The C50 incorporates an electronic state-of-charge indicator.

Model	9387
Voltage	14.4V
Capacity	50Wh
Size	162 x 105 x 31mm
Weight	1.2kg

PAG Digital SuperPack

A 13.2V 5Ah Digital Ni-Cd battery.

The battery displays a countdown,
in 5% increments, in the camera viewfinder, when used with the PAG System RTI.

Away from the camera the battery provides a capacity reading with the PAG Digital Battery Reader.

Model	9357
Voltage	13.2V
Capacity	5Ah
Size	208 x 126 x 44mm
Weight	1.95kg

PAG L95 Time Battery

The L95 Time Battery embodies advanced Li-Ion cell-technology
that combines a 95 watt-hour
capacity with a weight of only 745g.

This means more run-time for both
a camcorder and a light up to 35W.

Two batteries provide enough power for a days shooting, and can be stowed in your camera bag.

The PAG L95 contains more safety features than Li-Ion batteries of other manufacturers, and complies fully with current air transportation regulations.

A unique high/low charge facility within the battery can be set by the user, providing a choice between extended cycle life or high capacity, when charged with PAG all-chemistry chargers.

Model	9382
Voltage	14.8V
Capacity	6.5Ah
Size	130 x 86 x 42mm
Weight	745g
Specification

Digital PAGlok Batteries
PAGlok batteries are available in a variety of sizes, voltages, capacities and cell-chemistries. At the top of the range are Digital System RTI / Time Batteries. These are the most technologically advanced in the industry, incorporating unique, proprietary features designed to assist the cameraman.		System RTI batteries are compatible with PAG’s digital battery system, and provide a countdown of run-time in the camera viewfinder. PAG Time Batteries display run-time on a built-in Power & Time Display, the most accurate in the industry, and are also System RTI compatible.

Safety, reliability and durability

The PAG L95 battery contains no less than 9 safety mechanisms, making it one of the safest batteries in the industry. It is protected against over and under voltage; over current (charge and discharge); over and under temperature; and inappropriate charge sources. Each protection feature has a back-up.

The internal circuits of PAG Li-Ion batteries are coated with Parylene, the premier conformal coating, to protect circuits against the results of

severe mechanical abuse to the cell pack. PAG believes this safety feature to be essential and yet other manufacturers fail to address this.

PAG L95 Li-Ion batteries have built-in RF resistance and are therefore less likely to shut-down in the field than competitors batteries, when used in close proximity to radio transceivers.

PAG L75 Time battery (Snap-On Compatible)

PAG L95 Time Battery PDF

PAG Power and Time Display

The PAG Time Battery is the most sophisticated battery to be presented to the broadcast industry.

It’s Power & Time display shows exactly how long the battery will power the camera in hours and
minutes.

The battery’s internal processor achieves this taking into account the charge status and condition of the cells, the changes of load that occur during use, and the ambient temperature.

The Power & Time Display is the most accurate capacity indication device available. It uses an easy-to-read digital character format, rather than confusing symbols, and displays remaining run-time in 1 minute increments. It also displays available capacity in 1% increments or 0.1Ah increments.

Click on image to refresh.