PAG AR Chargers, Pulsar Charger, PAG Quasar Charger and Charger Adptor.

Inteligent Charge Adaptor for V-mount Li-Ion batteries

This adaptor, can be used to charge V-Mount Li-Ion batteries, via the PP90 socket of any PAG AR Series 2, Pulsar or Quasar charger.

Intelligent Charge Adaptor for V-Mount Li-Ion

PAG Quasar

A compact and lightweight, 2-channel charger (half the size of the AR124PLD), incorporating an optional camera power supply.

Charges PAG Li-Ion, as well as Ni-Cd and Ni-MH batteries of any reputable manufacturer, within the ranges 4.8V to 14.8V, and 1Ah to 10Ah.

The camera power supply provides
a nominal 50W suitable for powering most professional broadcast cameras. In power supply mode the Quasar displays an accurate digital bar-graph of power consumption.

The Quasar is easy to operate and features a large backlit LCD display, providing battery voltage and charge loaded information.

PAG Quasar (PSU)

Model	9752
Connectors	2 x PAGlok connectors 2 x PP90 (2.1mm)
Size	185 x 135 x 72mm
Weight	0.88kg
Features	Power Supply Recovery Charge

PAG Quasar

Model	9726
Connectors	2 x PAGlok connectors 2 x PP90 (2.1mm)
Size	185 x 135 x 72mm
Weight	0.88kg
Features	Recovery Charge

More Information

PAG AR124PLD

A 4-channel, all-chemistry battery management system.

Incorporates 4 PAGlok connectors and 4 PP90 sockets.

Charges PAG Li-Ion, as well as Ni-Cd and Ni-MH batteries of any reputable manufacturer, within the ranges 4.8V to 14.8V, and 1Ah to 10Ah.

Easy to operate and features a large backlit LCD display, providing battery voltage and charge loaded information.

PP90 sockets allow the use of charging adaptors, such as Model 9617 for charging PAG V-Mount
Li-Ion batteries.

Model	9792
Connectors	4 x PAGlok 4 x PP90 (2.1mm)
Size	240 x 168 x 42mm
Weight	1.23kg
Features	Discharge Program Recovery Charge

Specification

AR Series 2 PDF

Freelancer PDF

PAG Quasar PAGlok connectors and camera Power Supply

Quasar PDF





PAG AR124PLD	PAG Quasar	PAG Freelancer	PAG MC124

© PAG Limited 2007

PAG Freelancer

The Freelancer incorporates a Recovery Charge program for PAG Li-Ion batteries that will automatically recover the battery when the output has been shut down by the internal protection circuit.

The Freelancer's user interface features a comprehensive LED indication of battery and charger status. The charger is fully automatic in operation and constantly monitors every process.

The Freelancer can be powered from almost any AC power supply, worldwide, or from a vehicle battery with the PAG Vehicle Battery Power Converter.

Model	9613
Connectors	2 x PAGlok connectors
Size	55 x 115 x 135mm
Weight	0.41kg


PAG Freelancer
The PAG Freelancer is a new, ultra-compact, economical 2-channel charger. It has a tough but lightweight moulded construction that makes it an ideal travel or back-up charger. It is only slightly larger than a PAG L95 Li-Ion battery, and fits easily into your camera bag. The all-chemistry PAG Freelancer incorporates two full-sized PAGlok connectors and will sequentially charge all PAGlok batteries.		The charger incorporates PAG ACS software which will extend the cycle life of your batteries. A fully discharged 5Ah battery will be fully-charged in approximately 3 hours 20 minutes. After charging, the Freelancer may apply a balancing charge, and a maintenance charge to keep the battery in peak condition.

PAG MC124

PAG MC124 is an intelligent fast-charger and battery management system, which operates under the control of PAG ACS. It is capable of measuring battery performance and recovering lost capacity.

PAG MC124 is suitable for PAG NMH batteries and Ni-Cd batteries in the ranges 4.8V to 14.4V and 1Ah to 7Ah.

Features include Analytic Discharge, Revitalise and Recovery Charge programs, a large backlit LCD screen and worldwide operation.

Model	9785
Connectors	4 x PAGlok, 4 x PP90
Size	294 x 170 x 160mm
Weight	2.7kg