The L95e incorporates a new capacity indicator called the Power & Time Circle. It uses five LEDs to display charge status in terms of percentage. When the display button is pressed each LED that is lit represents approximately 20% of available capacity.

> High-quality Li-Ion broadcast battery

> Replacement for Anton-Bauer Dionic 90

> Charges on Anton-Bauer Li-Ion chargers

> Compatible with Anton-Bauer mounts

> 14.8V 6.5Ah 95Wh

> 7A maximum continuous output

> 5 LED Run-Time and Capacity Indicator

> More safety features than other Li-Ions

> Electronic protection system

> Circuit protected against damage

> Compact and lightweight

> No air transport restrictions

> 18 month warranty

The Smarter Choice
The PAG L95e is a 14.8V 6.5Ah Li-Ion battery that has a maximum continuous output current rated at 7 amps. It has been designed and manufactured as a replacement battery for the Anton-Bauer Dionic 90. One of the significant advantages of the PAG L95e, apart from its lower cost, is that it can be directly charged using existing stocks of Anton-Bauer Li-Ion compatible chargers. The new PAG L95e is compatible with cameras that incorporate the Anton-Bauer battery mount; additional battery mount adaptors are not required. It is now possible to switch to PAG's superior Li-Ion battery system without the cost and inconvenience of changing battery mounts or chargers.

Quality Assured
PAG's new Snap-on L95e battery has a high-quality construction and incorporates premier quality, branded Li-Ion cells. The quality of the cells and the materials used in their construction are a vital prerequisite to the creation of a safe Li-Ion battery. The L95e features a multi-layered electronic protection circuit to ensure that it is one of the safest Li-Ion batteries available. These features help prevent the damaging processes that reduce capacity. The circuit is itself protected against the results of damage to the cell pack, by a coating of Parylene, the premier conformal coating. PAG is the only manufacturer that goes to these lengths to create a safer battery. PAG guarantees the L95e for 18 months.

Capacity and Run-Time Indication
The Snap-on L95e incorporates PAG's latest capacity indicator, the Power & Time Circle. It uses five LEDs to display charge status in terms of percentage. When the display button is pressed each LED that is lit represents approximately 20% of available capacity. The display is also capable of indicating an estimate of remaining run-time, on-load. The LEDs indicate the number of remaining hours and minutes of camera run-time, accurate to 10 minutes.

No Air Transport Restrictions
There are no air transportation restrictions when travelling with the PAG L95e, its capacity is below 100 watt-hours and it is therefore classified as a non-hazardous item.

Quick Recovery
If the battery has been shut down by its protection circuit it can be quickly recovered by simply removing it from the load and pressing the display button, provided the battery still retains some charge.

Specification:

Model No. 9310A
Incorporates a PAG Snap-on compatible battery connector, suitable for use with all Anton-Bauer battery mounts.

Construction:
The casing for this model consists of high-impact polycarbonate injection mouldings,

featuring an internal cradle designed to protect the cells from impact damage. The cells have welded interconnections of low-resistance nickel strap. The battery is sealed and non user-serviceable.

Cells:
Premium grade Lithium-Ion sealed rechargeable cylindrical cells.

Voltage:
14.8V nominal. The battery contains 12 cells connected in series/parallel. Each cell has a nominal voltage of 3.7V.

Capacity:
Nominal 6.5 ampere-hours, with a charge voltage of 4.2V per cell.

Output Current:
Rated maximum continuous output current is 7.0 amperes.

Protection:
The battery incorporates the following safety shutdown systems:
> 3 over-current shutdown systems.
> 2 over-voltage shutdown systems.
> 2 under-voltage shutdown systems.
> 2 thermal shutdown systems (including a non-resetting thermal fuse).

The protection circuit within the battery is coated with Parylene and designed to withstand the leakage of electrolyte.

Charging:
Compatible with all Anton-Bauer Li-Ion enabled chargers, as well as PAG Li-Ion chargers.

PAG Power & Time Circle Display:
A single button-press displays charge status in terms of percentage. The LEDs light clockwise, from the top right round to top left.

5 LEDs = > 90% remaining
4 LEDs = 70 - 90% remaining
3 LEDs = 50 - 70% remaining
2 LEDs = 30 - 50% remaining
1 LED = 10 - 30% remaining
1 LED flashing = 0 - 10% remaining

The display is also capable of indicating an estimate of remaining run-time, on-load:

> The second button-press activates the time display. > The 'HRS' LED will flash twice.		>The number of hours is indicated by the number of lit LEDs: 2 LEDs = 2 hours.



>The 'MINS' LED will then flash twice.		> The number of additional remaining minutes will be indicated by the number of lit LEDs: each LED represents approximately 10 minutes.

Operating Temperature Range:
Optimum discharge efficiency is achieved within the temperature range +10 deg. C to +40 deg. C.

Overall Dimensions:
130 x 86 x 52mm (5.1" x 3.4" x 2") excluding mushroom connectors.

Weight:
0.76kg (1.67lbs).