PAG launches its new ZL-Series of flight-friendly Zero-Lithium Travel-Pack batteries at NAB.

The L95e incorporates a new capacity indicator called the Power & Time Circle. It uses five LEDs to display charge status in terms of percentage. When the display button is pressed each LED that is lit represents approximately 20% of available capacity.

Specification

Model No. 9310
PAGlok professional battery connector.

Model No. 9310V
Sony V-Mount compatible battery connector.

Construction:
The casing for these models consists of high-impact polycarbonate injection mouldings, featuring an internal cradle designed to protect the cells from impact damage. The cells have welded interconnections of low-resistance nickel strap. The batteries are sealed and non user-serviceable.

Cells:
Premium grade Lithium-Ion sealed rechargeable
cylindrical cells.

Voltage:
14.8V nominal. The battery contains 12 cells connected in series/parallel. Each cell has a nominal voltage of 3.7V.

Capacity:
Nominal 6.5 ampere-hours, with a charge voltage of 4.2V per cell.

Output Current:
Rated maximum continuous output current is 7.0 amperes.

Protection:
The battery incorporates the following safety shutdown systems:

	3 over-current shutdown systems.
	2 over-voltage shutdown systems.
	2 under-voltage shutdown systems.
	2 thermal shutdown systems (including a non-resetting thermal fuse).

All protection circuits within the battery are
designed to withstand the leakage of electrolyte.

Operating Temperature Range:
Optimum discharge efficiency is achieved within the temperature range +10°C to +40°C.

PAG Power & Time Circle Display:
A single button-press displays charge status in terms of percentage. The LEDs light clockwise, from the top right round to top left.

5 LEDs		=	> 90%	remaining
4 LEDs		=	70 - 90%	remaining
3 LEDs		=	50 - 70%	remaining
3 LEDs		=	30 - 50%	remaining
1 LEDs		=	10 - 30%	remaining
1 LEDs	flashing	=	0 - 10%	remaining

The display is also capable of indicating an estimate of remaining run-time, on-load:

	The second button-press activates the time display.
	The ‘HRS’ LED will flash twice.
	The number of remaining hours will be indicated by the number of lit LEDs: each LED represents 1 hour.
	The ‘MINS’ LED will then flash twice.
	The number of additional remaining minutes will be indicated by the number of lit LEDs: each LED represents approximately 10 minutes.

NOTE: This product provides an estimate of remaining run-time. A more accurate and sophisticated run-time display is provided by the PAG Power & Time Display, incorporated in the L95 Time Battery (Models 9382 PAGlok, 9360 V-Mount and 9383 Snap-on).

Overall Dimensions:
	Height	Width	Depth
PAGlok*	130mm (5.1")	86mm (3.4")	42mm (1.65")
V-Mount	130mm (5.1")	86mm (3.4")	47mm (1.85")
*excluding locking claws
Weight:
PAGlok	731g (1.61lbs)
V-Mount	749g (1.65lbs)

	L95e PDF