|
Specification
Model No. 9374
Construction:
PAGlok batteries have welded cell interconnections of low-resistance nickel strap. The case for these models
consists of high-impact injection mouldings with an internal cradle feature designed to protect the cells from impact damage. The batteries are sealed and non user-serviceable.
Cells:
Premium grade Nickel-Metal Hydride sealed rechargeable cylindrical cells.
Voltage:
14.4V nominal (12 cells connected in series, nominal voltage 1.2V per cell).
Capacity:
4.0 ampere-hours, measured at the five hour rate.
|
 |
Output Protection:
The PAG NMH60 is protected against short circuit and excessive currents by means of a self-resetting protection device. Rated maximum continuous output current is 4.5 Amperes. The battery is also protected against over-temperature by means of a non-resetting thermal fuse rated 98øC.
Operating Temperature Range:
Optimum discharge efficiency is achieved within the temperature range 10øC to +40øC.
Capacity Data:
The battery incorporates state-of-the-art low-power microelectronic circuits, giving the user access to the battery state of charge and run-time information.
|
|
Display:
The battery can display capacity in ampere-hours in 0.1Ah increments, and percentage of remaining available capacity in 1% increments. When on-load, a run-time prediction can be displayed.
Weight:
880g (2lbs approx.).
Size:
130mm (H) x 86mm (W) x 42mm (D) excluding locking claws. |
