PAG launches its new ZL-Series of flight-friendly Zero-Lithium Travel-Pack batteries at NAB.

The L95e incorporates a new capacity indicator called the Power & Time Circle. It uses five LEDs to display charge status in terms of percentage. When the display button is pressed each LED that is lit represents approximately 20% of available capacity.

Specification

Model No. 9302
PAGlok professional battery connector.

Model No. 9302V
Sony V-Mount compatible battery connector.

Model No. 9302A
Snap-on compatible battery connector.

Construction:
The casing for these models consists of high-impact poly-carbonate injection mouldings, featuring an internal cradle designed to protect the cells from impact damage. The cells have welded interconnections of low-resistance nickel strap. The batteries are sealed and non user-serviceable.

Cells:
Premium grade Lithium-Ion sealed rechargeable cylindrical cells.

Voltage:
14.8V nominal. The battery contains 12 cells connected in series/parallel. Each cell has a nominal voltage of 3.7V.

Capacity:
Nominal 7.5 ampere-hours.

Output Current:
Rated maximum continuous output current is 7.0 amperes.

Operating Temperature Range:
Optimum discharge efficiency is achieved within the
temperature range +10°C to +40°C.

Battery Protection:
The battery incorporates the following safety shutdown systems:

	3 over-current shutdown systems.
	2 over-voltage shutdown systems.

	2 under-voltage shutdown systems.
	2 thermal shutdown systems (including non-resetting thermal fuse).

All electronic protection circuits within the battery are designed to withstand the leakage of electrolyte.

Capacity Data:
The battery incorporates state-of-the-art low-power micro-electronic circuits, giving the user access to the battery state of charge and run-time information

Power & Time Display:
The PAG L95 Time Battery is able to display an accurate run-time prediction, against any given load, expressed in hours and minutes on the built-in Power & Time Display.

It can also display capacity in ampere-hours in 0.1Ah
increments, and percentage of remaining available capacity in 1% increments.

Overall Dimensions:
	Height	Width	Depth
PAGlok*	130mm (5.1")	86mm (3.4")	42mm (1.65")
V-Mount	130mm (5.1")	86mm (3.4")	47mm (1.85")
Snap-on	130mm (5.1")	86mm (3.4"	52mm (2.00")
*excluding locking claws
	Weight:
PAGlok	745g (1.64lbs)
V-Mount	745g (1.64lbs)
Snap-on	760g (1.67lbs)
	L110 PDF