Snap-on Compatible Connectors:
Patented professional connector compatible with all Anton-Bauer batteries and
PAG L75 Li-Ion Time Battery, Model No. 9366.

PP90 Connectors:
Polarised connector suitable for 2.1mm coaxial DC power connectors.
NOTE: centre pin negative.

Main Charge Program:
Auto Mode: Automatically selects the correct charge current.

Manual Selection: 2A or 3A charge current.

Li-Ion Voltage-Charge Program: Only available with PAG intelligent batteries or suitable PAG intelligent adaptor. PAG intelligent batteries automatically over-ride the Auto Mode or Manual selection, and control their own charge regime.

Recovery Charge:
This special program conditions the battery for a period of one hour. The charger will then automatically enter the Main Charge program, which will run until the battery is fully charged. This program also recovers PAG Li-Ion batteries which have been over-discharged to the point where the internal safety protection circuit has tripped.

Ancillary Charging Programs:
The following programs may be automatically entered after charging:
Balancing Charge.
Self-adjusting Maintenance Charge
(not applied to PAG Li-Ion batteries).

Self Test Program:
The internal microcomputer constantly monitors the battery under charge or process as well as the operation of the charger's own functions which will be shut down to a safe condition should any of the tests fail.

Camera Power Supply (Models 9752 & 9753 only):
These models feature a Power Supply rated 13.5V to 14.5V DC, 3.7A max. (50W nominal),
and is intended for powering a camera only. Connector: XLR-4 (F), pin 1 neg. pin 4 pos.

Mains Input:
100-250V~. Frequency 47-63 Hz.
Maximum power consumption 100W.

Output:
26V DC 4A maximum.

Output Protection:
Charger protected against short circuit, open circuit, excess battery voltage and reverse battery voltage.

AC Mains Failure Protection:
Should mains failure occur during a charging program, or whilst the charger is connected, it will shut down to a safe condition.

User Interface:
The backlit LCD screen has a display area of 64mm x 15mm, which displays 2 lines of text, with 16 characters per line. The front panel incorporates a soft function switch for the selection of programs and interrogation of charge data.

Safety:
Designed to comply with electrical safety standard EN 60065 and UL6500. NOTE: U.K. mains leads are fitted with a 1" fuse to BS1362 rated 5A as standard.

European Union Directives:
Complies with the following EU Directives: EMC Directive 89/336/EU. Low Voltage Directive 73/23/EU.

Operating Temperature Range:
0°C to 40°C (+32°F to +104°F).

Overall Dimensions:
Models 9726 & 9752:
72mm high x 135mm wide x 185mm deep
(2.8" x 5.3" x 7.3" approx.).

Models 9727 & 9753:
80mm high x 135mm wide x 185mm deep
(3.1" x 5.3" x 7.3" approx.).

Weight:
Models 9726 & 9752: 882g
(1.94lbs approx.).

Models 9727 & 9753: 844g
(1.86lbs approx.).