PAG ENG Lighting Shootout

Paglight

The patented plug-in lamp holder design enables one light to be used for different applications. The plug-in PowerArc provides instant conversion to HMI. Convenient and economic.

Lamp changing is instant and easy. There is no direct contact with hot components.

The light utilises cost-effective halogen capsule lamps.

The lamp head is fully-focusable with
a smooth transition from spot to flood,

and an even spectral distribution.

The patented heat-dissipation system
and use of modern engineering polymers
in its construction make Paglight the
coolest running light in the industry.

Frezzi Mini-Fill
	The Mini-Fill cannot be converted into an HMI, another light must be purchased, which is inconvenient and uneconomic.			Instant lamp changing is impossible. You must wait for the light to cool first, or use gloves.
	The light output is uneven, with hot-spots, spill light and shadows.			Replacement lamps are expensive and the wrong type of lamp can be fitted in error.
	The metal construction means that the average running temperature is above 100°C! Too hot to handle!

Anton/Bauer Ultralight 2
	A different lamp head is required to convert the light into an HMI, which is inconvenient and uneconomic.			The metal construction means that the average running temperature is above 100°C! Too hot to handle!
	The lamp head is non-focusable. Different reflector lamps are required to change the beam angle.			Instant lamp changing is impossible. You must wait for the light to cool first, or use gloves.
	The light output is uneven, with hot-spots, spill light and shadows.			Replacement lamps are expensive and the wrong type of lamp can be fitted in error.

IDX X3-Lite (LED)
	The light output is intense and harsh in appearance, making it uncomfortable to look at.			LED lights do not reproduce the full colour spectrum well; reds, browns and flesh colours lack saturation and vibrancy.
	The lamp head is non-focusable. The light output loses intensity substantially over a short distance.			The internal temperature reaches 70°C, high for an 11W light.
	The light cannot be adapted to produce a greater output, if required.			The metal barn doors and filter holders are sharp and non-rotatable.