Specifications:
PAG Cube Charger
Model No. 9702V
Battery Connections:
4 x V-Mount compatible connectors.
Range of Batteries Charged:
PAG V-Mount Li-Ion: L95 (Models 9360, 9335V & 9310V), L110 (Model 9302V).
PAG V-Mount ZL-Series: ZL-150 and ZL-50 (Models 9316V and 9315V).
Sony V-Mount Li-Ion and Ni-MH.
IDX V-Mount Li-Ion.
Main Charge Programs:
Li-ion Intelligent Parallel Charging program: maximum output 6A at 16.8V (100W approx.).
PAG ACS Ni-MH sequential charge program: output 3A.
Recovery Feature:
Automatically recovers a Li-Ion battery where the output has been shut down. Additionally, the program detects batteries having a very low voltage, and initiates a special low charge current.
|
 |
The program will operate until the voltage has risen sufficiently for batteries to safely accept the normal charge current.
Self Test Program:
The internal microcomputer constantly monitors the battery under charge or process as well as the operation of the charger’s own functions which will be shut down to a safe condition should any of the tests fail.
Mains Input:
90V to 265VAC. Frequency 50-60Hz. EN6100-3-2 Power factor corrected. Maximum consumption 140W.
Output Protection:
Charger protected against short circuit and excess battery voltage.
AC Mains Failure Protection:
Should mains failure occur during a charging program, or whilst the charger is connected, it will shut down to a safe condition.
User Interface:
Comprehensive LCD indication of charging progress. The charger is fully automatic in operation and no user controls are provided.
|
|
- Safety:
Designed to comply with electrical safety standard BS EN 60065 and UL6500. NOTE: U.K. mains leads are fitted with a 1" fuse to BS1362 rated 5A as standard.
European Union Directives:
Complies with the following:
EMC Directive 89/336/EU.
Low Voltage Directive 73/23/EU.
Operating Temperature Range:
0°C to +40°C
(+32°F to +104°F).
Overall Dimensions
(H x W x D):
157 x 157 x 157mm
(6.2 x 6.2 x6.2")
Weight
1.9kg
Typical Charging Times:
1 |
PAG L95 |
3hrs 15mins |
| 2 |
PAG L95s |
4hrs |
| 3 |
PAG L95s |
5hrs |
| 4 |
PAG L95s |
6hrs 30mins |
These times are approximate only, and assume batteries are fully discharged. Charging times will be less if batteries are already partially charged.
|
PAG V4-CPA Camera Power Adaptor
Model No. 9701V
Input Connection:
To be powered only from the appropriate charger
(see above).
Output:
16.8V DC. Maximum current 5.5A (90W).
|
|
Output Connector:
XLR-4 (F) connector (Pin 1 Negative, Pin 4 Positive).
Overall Dimensions
(H x W x D):
130 x 86 x 47mm
(5.1" x 3.4" x 1.85")
Weight:
190g (6.7oz approx.) |
|
 |
