New Products

This page is designed to keep you informed about the latest additions to the PAG product range.

In each case we have provided a link through to the product page in the PAG store so that you can order it online, or just find out more about it.


PAGlink Gold Mount Micro Charger (Apr 2017)

Charging batteries on location used to mean bringing a large, 4-channel charger with you, capable of charging one battery per channel. PAG changed all of that with the introduction of linked battery charging and then the ultra-compact Micro Charger, which is now available for PAGlink Gold Mount batteries.

9713

PAGlink Gold Mount Micro Charger

Low-cost, ultra-compact, travel-charger for the simultaneous charging of multiple PAGlink Gold Mount batteries. It can also be used for charging sequentially PAG and Anton/Bauer non-linking Gold Mount Li-Ion batteries. AC and DC input connectors included.

Model 9713

Read More


PAGlink Gold Mount PowerHub (Apr 2017)

The PowerHub provides the multiple outputs that are required to power camera set-ups that feature accessories such as a camera light, a monitor, and audio or transmission devices. It is designed to be used sandwiched between two PAGlink Gold Mount batteries to maintain their hot-swap capability while keeping accessories powered-up.

9712

PAGlink Gold Mount PowerHub

The PowerHub incorporates four D-Tap output connectors for powering your 12V camera accessories, and a USB output (5V, 1A) that allows you to charge your smartphone, using PAGlink Gold Mount batteries.

Model 9712

Read More


PAGlink Gold Mount Battery Reader (Jan 2017)

Managing your batteries efficiently requires knowledge of their condition and history. Information such as charge status, available capacity, total capacity and the number of charge/ discharge cycles is vital. PAG has made this easier for you with the introduction of its new PAGlink Gold Mount Battery Reader.

9647A

PAGlink Gold Mount Battery Reader

The Battery Reader enables you to display data stored in the microprocessor of PAGlink Gold Mount batteries. It is a compact and lightweight tool that you slide onto the battery contacts. It features an easy-to-understand alphanumeric display.

Model 9647A

Read More


Lemo Connector for PAGlink PowerHub (Nov 2016)

PAG now offers a Lemo Connector (2-pin) which is interchangeable with any of the D-Tap connectors supplied with the PAGlink PowerHub.

9709L

Lemo Connector for PAGlink PowerHub

Lemo plug-in 2-pin output connector, interchangeable with other connector types and user-configurable to the left or right side of the PowerHub. For powering 12V camera accessories.

Model 9709L

Read More


PAGlink PL150 Batteries

PAG has introduced a series of new PAGlink batteries that have a capacity of 150Wh. The intelligent linking batteries incorporate the latest high-capacity Li-Ion cells. PAG has been able to increase capacity by 50% without increasing the battery size. The PL150 batteries are fully compatible with the 94Wh/96Wh PAGlink battery range. They have the highest energy density of any 150Wh Li-Ion battery brought to market, and are ideal for powering digital cinema camera setups that have a high power consumption.

PL150T

PAGlink PL150T Time Battery (V-Mount)

150Wh, 14.8V 10Ah PAGlink V-Mount Li-Ion Battery. Power your set-up for 50% longer, and see remaining Run-Time & Capacity expressed numerically at the press of a button. Link batteries to increase the current- draw capability from 8A to 12A. Hot-swap batteries for continuous power.

Model 9309

Read More

PL150e

PAGlink PL150e Time Battery (V-Mount)

150Wh, 14.8V 10Ah PAGlink V-Mount Li-Ion Battery. Power your set-up for 50% longer, and see remaining Run-Time & Capacity expressed via a 5-light indicator. Link batteries to increase the current-draw capability from 8A to 12A. Hot-swap batteries for continuous power.

Model 9308

Read More

HC-PL150T

PAGlink HC-PL150T Time Battery (Gold Mount)

150Wh, 14.8V 10Ah PAGlink Gold Mount Li-Ion Battery. Power your set- up for 50% longer, and see remaining Run-Time & Capacity expressed numerically at the press of a button. Link batteries to increase the current- draw capability from 10A to 12A. Hot-swap batteries for continuous power.

Model 9313

Read More


PAGlink PL16+ V-Mount Charger (4-Position)

A new V-Mount charger, featuring all the benefits of PAG’s linked-charging technology but with 4 charging positions. 8 linked batteries can be charged simultaneously on each position. 16 batteries can be charged in 24 hours, making the PL16+ an ideal workshop charger for broadcast organisations and camera rental companies. Its slim design and weight of only 1.6kg (3.5lbs) also make it very portable.

9711

PAGlink PL16+ Charger (V-Mount)

Charge even more batteries on one slim, lightweight, 4-position V-Mount charger. The PL16+ has a high-powered output of 100W; a robust aluminium construction and an automatic recovery feature for over-discharged batteries.

Model 9711

Read More


PAGlink PL16+ Gold Mount Charger (4-Position)

A new Gold Mount charger, featuring all the benefits of PAG’s linked-charging technology but with 4 charging positions. 8 linked batteries can be charged simultaneously on each position. 16 batteries can be charged in 24 hours, making the PL16+ an ideal workshop charger for broadcast organisations and camera rental companies. Its slim design and weight of only 1.6kg (3.5lbs) also make it very portable.

9711A

PAGlink PL16+ Charger (Gold Mount)

Charge even more batteries on one slim, lightweight, 4-position Gold Mount charger. The PL16+ has a high-powered output of 100W; a robust aluminium construction and an automatic recovery feature for over-discharged batteries.

Model 9711A

Read More


PAG L90 Slim Battery

The PAG L90 Slim has an ultra low-profile of 35mm and a weight of only 567g. It has been designed to power the new generation of smaller digital cinema cameras, especially when mounted to gimbals or drones. The cell-pack has been designed to withstand the vibration associated with multi-rotor aerial platforms. The L90 incorporates the latest high-current Li-Ion cells, providing a continuous current-draw of 10A, and a capacity of 90Wh, ensuring the highest energy density of any 90Wh V-Mount Li-Ion battery brought to market.

9307V

PAG L90 Slim Battery (V-Mount)

90Wh, 14.8V 6.1Ah, V-Mount Li-Ion battery. The intelligent L90 Slim battery manages its own charge and discharge safely. Reliability, durability and longevity are integral to the battery design. It features a new and unique orientation-sensing Run-Time & Capacity display.

Model 9307V

Read More


30V Power Modules

Power 30V lighting without the need to purchase additional, expensive 30V batteries and chargers. Combine the voltages of your V-Mount or Gold Mount camera batteries, using a PAG Series Power Module, and maximise the return on your camera battery investment. Achieve continuous 30V power by hot-swapping PAGlink batteries.

9581V

PAG Series Power Module (V-Mount)

For use with PAGlink and PAG L96 batteries which have been designed to allow connection in series. Create an output equivalent to the sum of the batteries combined voltages and power 30V equipment. Output is via XLR4 connectors (Amphenol can be included).

Model 9581V

Read More

9581A

PAG Series Power Module (Gold Mount)

For use with PAGlink and PAG L96 batteries which have been designed to allow connection in series. Create an output equivalent to the sum of the batteries combined voltages and power 30V equipment. Output is via 2 x XLR4 connectors, and 1 x Amphenol.

Model 9581A

Read More


PAGlink PL16 Gold Mount Charger

Charge up to 16 PAGlink Gold Mount batteries, 8 on each position, using this new, ultra-compact and efficient PAGlink PL16 Charger. Ideal for broadcast organisations and rental companies, the PL16 reduces the number of chargers you need to manage a large battery inventory. On location, you can charge 8 batteries overnight on one charger, without having to swap them over. Linked charging was developed by PAG and is unique to the PAGlink system.

9707A

PAGlink PL16 Gold Mount Charger

Two-position simultaneous charger for PAGlink and standard PAG Gold Mount batteries. Charges simultaneously up to 16 PAGlink batteries (between 1 and 8 linked on each channel). Incorporates a Recovery Charge feature and 100W camera power supply.

Model 9707A

Read More


PAGlink HC-PL94T Time Battery / Gold Mount

Replace your Anton/Bauer Li-Ion batteries with a superior, high-current, intelligent linking battery. Combine capacities for a longer run-time or a current draw capability of up to 12A - ideal for power-hungry camera setups. Hot-swap batteries for continuous power. The PAGlink HC-PL94T is compatible with the AB Gold Mount camera plate and AB Li-Ion chargers. There is no need to throw-out expensive kit in order to benefit from PAG’s truly digital and cutting edge linking battery technology.

9306

PAGlink HC-PL94T Time Battery (Gold Mount)

94 watt-hour (14.8V 6.4Ah) Li-Ion battery. Provides 10A individually, 12A when linked. Features a numeric run-time and capacity display with unmatched resolution and accuracy. Charge batteries linked for greater convenience and efficiency, even using Anton/Bauer Li-Ion chargers.

Model 9306

Read More


PAG D-Tap Power Leads for DSLR & Digital Cinema Cameras

Now you can power your DSLR or Digital Cinema Camera using PAG V-Mount Li-Ion batteries (PAGlink, or standard PAG V-Mount). This means longer run-times or a higher current-draw capability, ideal for powering the camera and multiple 12V accessories simultaneously. These new D-Tap Power Leads are camera specific and are intended for use with PAG V-Mount Plate (Model 9401), which features a D-Tap output. Models for other cameras can be supplied on request.

9637/01

D-Tap Power Lead inc. Down-Converter for Nikon D800

Enables you to power your camera using PAGlink or standard PAG V-Mount Li-Ion batteries, for a longer run-time or a higher current-draw capability. For use with PAG V-Mount plate Model 9401, which features a D-Tap output and 15mm rod clamp.

Model 9637/01

Read More

9637/02

D-Tap Power Lead inc. Down-Converter for Canon C300

Enables you to power your camera using PAGlink or standard PAG V-Mount Li-Ion batteries, for a longer run-time or a higher current-draw capability. For use with PAG V-Mount plate Model 9401, which features a D-Tap output and 15mm rod clamp.

Model 9637/02

Read More

9638

D-Tap Power Lead for Blackmagic Cinema Camera

Enables you to power your camera using PAGlink or standard PAG V-Mount Li-Ion batteries, for a longer run-time or a higher current-draw capability. For use with PAG V-Mount plate Model 9401, which features a D-Tap output and 15mm rod clamp.

Model 9638

Read More


PAG L96 Gold Mount Broadcast Batteries

The PAG L96 Series of broadcast batteries now includes enhanced Gold Mount versions that are compatible with Anton Bauer Li-Ion chargers and data system. There are two models, providing a choice of run-time and capacity display. The L96T Time Battery features PAG’s industry leading numeric run-time display, while the lower-cost L95e model features PAG’s unique 5 LED run-time indicator. The L96 offers enhanced features and a superior performance. It provides a maximum continuous output of 8A, compared to the 7A offered by the L95, and performs better at low temperatures, even down to -20°C.

9305A

PAG L96T Battery 14.8V 6.5Ah (Gold Mount)

A high-quality, 96 watt-hour Li-Ion battery, designed for broadcast ENG and all forms of professional video production. Provides a continuous output of 8A, and features a numeric run-time and capacity display. Compatible with Anton Bauer Li-Ion chargers and data system.

Model 9305A

Read More

9310A

PAG L96e Battery 14.8V 6.5Ah (Gold Mount)

A 96 watt-hour broadcast battery constructed to the highest quality standard and yet competitively priced. Provides a continuous output of 8A and features a built-in LED run-time and capacity display. Compatible with Anton Bauer Li-Ion chargers and data system.

Model 9310A

Read More


PAGlink PowerHub Connectors

The PAGlink PowerHub accepts a range of interchangeable plug-in output connectors. PowerHub Model 9709 is supplied with four D-Tap connectors, however, Hirose, 2.1mm (PP90) and additional D-Tap connectors can also be purchased individually.

9709H

Hirose Connector for PAGlink PowerHub

Plug-in 4-pin Hirose output connector, interchangeable with other connector types and user-configurable to the left or right side of the PowerHub. For powering 12V camera accessories.

Model 9709H

Read More

9709P

2.1mm (PP90) Connector for PAGlink PowerHub

Plug-in 2.1mm (PP90) output connector, interchangeable with other connector types and user-configurable to the left or right side of the PowerHub. For powering 12V camera accessories.

Model 9709P

Read More

9709D

D-Tap Connector for PAGlink PowerHub

Plug-in D-Tap output connector, interchangeable with other connector types and user-configurable to the left or right side of the PowerHub. For powering 12V camera accessories.

Model 9709D

Read More


PAG V-Mount Plates for DSLR & Digital Cinema Cameras

PAG has introduced a new range of V-Mount Plates and D-Tap Power Leads for a wide range of popular cameras, including DSLR and digital cinema cameras such as: Blackmagic Digital Cinema, Canon C300/500, Canon EOS 5D & 7D, Nikon D800 & Red Epic/Scarlet. The new mounts and leads enable you to power these popular cameras using the latest, intelligent PAGlink Li-Ion batteries.

9401

PAG V-Mount Plate (15mm rod clamp / D-Tap output)

A lightweight, easy to fit battery mount that enables you to power DSLR and digital cinema cameras from PAGlink batteries. This model features a D-Tap output and a clamp for use with 15mm mattebox/camera accessory rods (rails/bars).

Model 9401

Read More

9402

PAG V-Mount Plate (19mm rod clamp / D-Tap output)

A lightweight, easy to fit battery mount that enables you to power DSLR and digital cinema cameras from PAGlink batteries. This model features a D-Tap output and a clamp for use with 15mm mattebox/camera accessory rods (rails/bars).

Model 9402

Read More


PAGlink Battery Reader

Managing your batteries efficiently requires knowledge of their condition and history. Information such as charge status, available capacity, total capacity and the number of charge/ discharge cycles is vital. PAG has made this easier for you with the introduction of its new PAGlink Battery Reader.

9647

PAGlink Battery Reader

The Battery Reader enables you to display data stored in the micro- processor of PAGlink intelligent digital batteries. It is a compact and lightweight tool that you slide onto the battery contacts. It features an easy-to-understand alphanumeric display.

Model 9647

Read More


PAGlink Power Hub

A new camera accessory power device for use with the PAGlink system of high-power linking batteries, designed for power-hungry applications. The PowerHub provides the multiple outputs that are required to power high-load camera set-ups that may feature accessories such as a camera light, a monitor, and audio or transmission devices. The PowerHub can be used sandwiched between two batteries to maintain the hot-swap feature, or connected to the rear battery to allow accessory mounting.

9709

PAGlink PowerHub

The PowerHub incorporates four D-Tap output connectors for powering 12V accessories, and a USB module (1 amp) that allows you to charge your smartphone, or power other accessories.

Model 9709

Read More


PAGlink Micro Charger

A new, ultra-compact battery charger designed to fit any kit bag and suit any budget. The PAGlink Micro Charger is ideal when you want to travel light and need to charge PAGlink batteries, or standard V-Mount Li-Ion batteries. PAGlink allows more than two batteries to be linked for charge or discharge. Using the Micro Charger, two fully discharged PAGlink batteries will be fully charged in 8 hours approx. The charger accepts a 100-240V AC input, and interchangeable plug adaptors, for use worldwide.

9710

PAGlink Micro Charger

Low-cost, ultra-compact PAGlink charger, also suitable for standard PAG or Sony V-Mount Li-Ion batteries.

Model 9710

Read More


PAGlink Cube Charger

The PAGlink Cube Charger is designed to charge simultaneously individual or linked PAGlink batteries from any state of charge. Up to four linked batteries can be charged on each position, effectively making the PAGlink Cube a 16 channel charger. Eight fully-discharged PAGlink batteries will be fully-charged in 10 hours. The PAGlink Cube can also be used to charge simultaneously the latest standard V-Mount Li-Ion batteries from PAG and Sony.

9708

PAGlink Cube Charger

Designed to charge simultaneously up to 16 PAGlink batteries from any state of charge. Also charges simultaneously the latest standard V-Mount Li-Ion batteries from PAG and Sony.

Model 9708

Read More


PAG L96T Time Battery

The new PAG L96T Time Battery is an enhanced version of the PAG L95 Time Battery, and a replacement for it. The L96T offers enhanced features and a superior performance at a greatly reduced price (from £457 to £289). It provides a maximum continuous output of 8A, compared to the 7A offered by the L95, and performs better at low temperatures. The L96T is available in V-Mount and PAGlok models. The V-Mount version is compatible with multiple viewfinder data systems that display capacity in the viewfinder, such as those used by Sony and Red cameras. The L96T features a numeric run-time and capacity display, providing added convenience for hard-pressed camera operators.

9305V

PAG L96T Time Battery (V-Mount)

A high-quality, 96 watt-hour Li-Ion battery, designed for broadcast ENG and all forms of professional video production. Provides a continuous output of 8A, and features a numeric run-time and capacity display.

Model 9305V

Read More

9305

PAG L96T Time Battery (PAGlok)

A high-quality, 96 watt-hour Li-Ion battery, designed for broadcast ENG and all forms of professional video production. Provides a continuous output of 8A, and features a numeric run-time and capacity display.

Model 9305

Read More


PAG L96e Broadcast Battery

The PAG L96e broadcast Li-Ion battery is an enhanced version of the PAG L95e, and a replacement for it. The L96e offers enhanced features and a superior performance for the same price. It provides a maximum continuous output of 8A, compared to the 7A offered by the L95e, and performs better at low temperatures, even down to -20°C. The L96e is available in V-Mount and PAGlok models; the V-Mount version is compatible with multiple viewfinder data systems, such as Sony and Red One, and adjusts automatically when presented.

9310V

PAG L96e Battery 14.8V 6.5Ah (V-Mount)

A 96 watt-hour broadcast battery constructed to the highest quality standard and yet competitively priced. Provides a continuous output of 8A and features a built-in run-time and capacity display.

Model 9310V

Read More

9310

PAG L96e Battery 14.8V 6.5Ah (PAGlok)

A 96 watt-hour broadcast battery constructed to the highest quality standard and yet competitively priced. Provides a continuous output of 8A and features a built-in run-time and capacity display.

Model 9310

Read More

New Camera Power Supplies

PAG has introduced two new compact and lightweight camera mounted power supply units, designed for powering broadcast cameras in a studio situation, from any AC power supply worldwide. The units offer 100 watts of constant power, incorporate XLR4 and USB output connectors, and are compatible with either the V-Mount or PAGlok battery mounting systems.

9750V

PAG CPS100 Camera Power Supply (V-Mount)

A compact and lightweight Camera Power Supply that produces a constant output of 100W at 15V and a peak output of 150W. Features 1 x XLR4 and 2 x USB (5V) power output connectors. Incorporates V-Mount connector.

Model 9750V

Read More

9750

PAG CPS100 Camera Power Supply (PAGlok)

A compact and lightweight Camera Power Supply that produces a constant output of 100W at 15V and a peak output of 150W. Features 1 x XLR4 and 2 x USB (5V) power outputs. Incorporates PAGlok connector.

Model 9750

Read More

New PAGlink Charger

The PAGlink PL16 Charger is the ideal location charger for PAGlink V-Mount Li-Ion batteries. Up to 16 PAGlink batteries can be charged simultaneously (8 per channel) on this new, high-powered, compact, two-position charger. At the end of a shoot, simply link your PAGlink batteries and connect them to the PL16 charger. The next day, they will be fully charged and ready to go. The high-power PL16 is capable of supplying 6A at 16.8V (approximately 100W). It is able to fully charge all of the batteries, fast and efficiently, regardless of the differences in state-of-charge. The charger features PAG’s Intelligent Parallel Charging software so that both positions are charging simultaneously

9707

PAGlink PL16 Charger

An ultra-compact, 2-position charger that simultaneously charges up to 16 PAGlink batteries (8 per channel). Includes 100W camera power supply with XLR4 output.

Model 9707

Read More

New PAGlink Batteries

PAG has introduced new system of high-power linking batteries, enabling you to combine the capacities of new 96 watthour V-Mount Li-Ion packs without the need for additional dual battery mounts. For the first time 2, 3 or up to 8 batteries can be linked for extended run-time and a high-load capability of 12A. When linked, the batteries form an intelligent network to control the discharging and the charging of the cells, providing a safe and efficient source of portable power that can be legally transported on passenger aircraft without quantity restriction. PAGlink batteries are smarter, smaller and lighter, with a higher energy density then any other system offered to date. This breakthrough in battery technology makes PAGlink batteries the most advanced in the industry

9303

PL96e 14.8V 6.5Ah 96 Watt-Hour Li-Ion V-Mount Linking Battery

Maximum current draw of 12A (when linked) and features PAG’s 5 LED Run-Time and Capacity display.

Model 9303

Read More

9304

PL96T 14.8V 6.5Ah 96 Watt-Hour Li-Ion V-Mount Linking Time Battery

Maximum current draw of 12A (when linked) and features PAG’s numeric LCD Run-Time and Capacity display.

Model 9304

Read More

Useful Adaptors For Charging iPhone or Laptop Batteries

These handy adaptors enable you to charge your iPhone or laptop battery using a PAG battery. There are three models, for use with either PAGlok, V-Mount or Snap-on batteries. The adaptor is designed to connect to a cigar lighter (male) to USB adaptor (not supplied).

9506

PAGlok to Vehicle Cigar Lighter (Female)

Charge your iPhone or laptop battery using any PAGlok battery.

Model 9506

Read More

9507

V-Mount to Vehicle Cigar Lighter (Female)

Charge your iPhone or laptop battery using any V-Mount battery.

Model 9507

Read More

9508

Anton-Bauer to Vehicle Cigar Lighter (Female)

Charge your iPhone or laptop battery using any PAG Snap-on or Anton-Bauer battery.

Model 9508

Read More

New Battery Mounts

Dual Battery Mount for Steadicam Pro Rig

A dual battery mount that combines the capacities of two Anton-Bauer or PAG Snap-on compatible batteries (L95e Model 9310A or L95 Time Battery Model 9383). For use with the Anton-Bauer battery mount on a Steadicam Pro Rig. Creates a capacity of 13Ah, 190 watt-hours, extending run-time and enabling currents up to 10A to be drawn.

9554

Dual Battery Mount for Steadicam Pro Rig

2 x PAG Snap-on or Anton-Bauer Batteries to Anton-Bauer Mount

Model 9554

Read More

X
Loading